Quantcast
Channel: Biotechnology Forums - All Forums
Viewing all 2695 articles
Browse latest View live

Events: SIG Workshop to discuss developments in computational pathology

0
0
Events: SIG Workshop to discuss developments in computational pathology and its interfacing opportunities with bioinformatics during ECCB 2018

Sunday, September 9, 2018
Athens, Greece (during ECCB2018)
cpw2018.org

Submission deadline for abstracts has been extended until August 15. Travel awards available!

Digital and computational pathology are increasingly used to study biological processes and diseases as novel molecular probing and imaging techniques allow the measurement of single molecules in whole tissue sections. Resulting multi-gigapixel images can be viewed on a computer screen via dedicated software. However, automated analysis of such large-scale datasets is challenging and their combination with omics data is not trivial. This workshop wants to facilitate bridging opportunities between the bioinformatics and tissue image analysis communities.

This second edition is organized as a full-day workshop during ECCB 2018 (www.eccb18.org).
SCOPE
Computational pathology exists at the interphase between bioinformatics, machine learning, and digital pathology (microscopy). Submissions from all topics of interest are welcome (non-exhaustive list):

Machine learning and image analysis for quantification in digital pathology (in 2D & 3D), Novel approaches (e.g. spatial or graph-based methods) to extract high-level features (e.g. molecular networks or spatial expression patterns) from tissue images for systems pathology, Software development methodologies and tools to ease the exploitation of large tissue images and integration with omics data, Novel molecular imaging techniques on tissues (molecular pathology, next generation pathology) and their analysis challenges, e.g. in situ hybridization, mass spectrometry imaging of formalin-fixed paraffin-embedded tissues, mass cytometry, and other spectroscopy techniques (Raman, ...), ... Research applications on non-human model organisms
KEYNOTE SPEAKERS
The following keynote speakers are confirmed to speak at the conference:

Thomas Fuchs, Memorial Sloan Kettering Cancer Center
Chakra Chennubhotla, University of Pittsburgh
Derek Magee, University of Leeds
SUBMISSIONS
The conference solicits oral talks, posters, and proceeding papers contributions of original work or work that was recently accepted or published in a peer-reviewed journal or at a high level international conference. In the latter case, the publication reference should be clearly mentioned, and the abstracts should be checked mainly for relevance, rather than receive a full review.

Conference proceedings will be published by the Journal of Pathology Informatics.

The program committee will decide which contributions are selected for an oral presentation, and which ones are presented during a poster session. For submission instructions, please refer to www.fourwav.es/cpw2018
KEY DATES
Submission deadline: August 15, 2018.
Conference: Sunday September 9, 2018.

Estonia Email List

0
0
If you run an affiliate program, be alert! There's a new scam around that could cost you not only lost revenue, but also your merchant account.

I've had an affiliate program for the past two years to sell my writing courses. It's been puttering along quite nicely with more than 100 affiliates. And while only a few are making significant sales, Estonia Email List that's the way most programs work, isn't it? Twenty percent of your affiliates bring in 80% of your sales.
Estonia Email List a high-quality email list you can purchase for email marketing campaigns online business. You can buy from here Estonia Email List that will help you promote your products in this country Estonia. So you must work with the Latest Mailing Database to send out your email. Just click the add to cart button, then it will redirect to checkout page, then put your billing info and pay this amount, for this database then you will get the download access to this Email Lists.
[Image: Estonia-Email-List.png]
Wow! I thought, if I could find out how to encourage all my other affiliates to make these sales, the sky's the limit! And off I went into a little fantasy world where I multiplied the number of affiliates by the number of sales a day and the profit I was making and after a year I'd have ... Well, I'm sure you've indulged in the same daydreams, haven't you?

Events: SIG Workshop to discuss developments in computational pathology

0
0
Events: SIG Workshop to discuss developments in computational pathology and its interfacing opportunities with bioinformatics during ECCB 2018

Sunday, September 9, 2018
Athens, Greece (during ECCB2018)
cpw2018.org

Submission deadline for abstracts has been extended until August 15. Travel awards available!

Digital and computational pathology are increasingly used to study biological processes and diseases as novel molecular probing and imaging techniques allow the measurement of single molecules in whole tissue sections. Resulting multi-gigapixel images can be viewed on a computer screen via dedicated software. However, automated analysis of such large-scale datasets is challenging and their combination with omics data is not trivial. This workshop wants to facilitate bridging opportunities between the bioinformatics and tissue image analysis communities.

This second edition is organized as a full-day workshop during ECCB 2018 (www.eccb18.org).
SCOPE
Computational pathology exists at the interphase between bioinformatics, machine learning, and digital pathology (microscopy). Submissions from all topics of interest are welcome (non-exhaustive list):

Machine learning and image analysis for quantification in digital pathology (in 2D & 3D), Novel approaches (e.g. spatial or graph-based methods) to extract high-level features (e.g. molecular networks or spatial expression patterns) from tissue images for systems pathology, Software development methodologies and tools to ease the exploitation of large tissue images and integration with omics data, Novel molecular imaging techniques on tissues (molecular pathology, next generation pathology) and their analysis challenges, e.g. in situ hybridization, mass spectrometry imaging of formalin-fixed paraffin-embedded tissues, mass cytometry, and other spectroscopy techniques (Raman, ...), ... Research applications on non-human model organisms
KEYNOTE SPEAKERS
The following keynote speakers are confirmed to speak at the conference:

Thomas Fuchs, Memorial Sloan Kettering Cancer Center
Chakra Chennubhotla, University of Pittsburgh
Derek Magee, University of Leeds
SUBMISSIONS
The conference solicits oral talks, posters, and proceeding papers contributions of original work or work that was recently accepted or published in a peer-reviewed journal or at a high level international conference. In the latter case, the publication reference should be clearly mentioned, and the abstracts should be checked mainly for relevance, rather than receive a full review.

Conference proceedings will be published by the Journal of Pathology Informatics.

The program committee will decide which contributions are selected for an oral presentation, and which ones are presented during a poster session. For submission instructions, please refer to www.fourwav.es/cpw2018
KEY DATES
Submission deadline: August 15, 2018.
Conference: Sunday September 9, 2018.

Introduction

0
0
Hello, everyone.i am gunaseelan ,2nd year btech biotech student.here many professionals guides biotech students .I am really happy to join this community.thanks everyone...

Sent from my Redmi Note 5 using Tapatalk

Best 5 Cell Phone Tracking Software » Comments Feed

0
0
No matter how efficient and effective mSpy mobile phone software may be, whether you should use it or not is entirely your decision. Essentially, you must ponder on what all you require from this kind of spying tool

Axiva Sichem Pvt.Ltd - Leading Manufacturer and Supplier of Lab Filtration Pr

0
0
Axiva Sichem Pvt.Ltd is leading manufacturer, supplier and exporter of wide array of laboratory filtration instrument such as (filter papers, syringe filters, membrane filters, absorbent pads, glass fiber filters, filtration assembly, filter funnel, lab filtration product, vacuum pumps, thimbles and blotting membranes) which is use in the fields of Biotech, Pharma, Air Monitoring (Environments), Universities, Oil petroleum and Hospitals.

Rahul Yadav Digital Marketing SEO Social Media PPC Consultant ORM & Advertising Exper

0
0
Rahul Yadav Digital Marketing SEO Social Media PPC Consultant ORM & Advertising Expert Agency From New Delhi India. SEO for Restaurants, Restaurant SEO Services Company

Data Analysis: What keeps you up at night?

0
0
Hello everyone,

What's the most frustrating thing about doing omics data analysis (RNA-Seq, DNA-Seq, Chip-Seq)? What's your approach and does it work?

Really looking forward to your feedback!

Thanks,
Polina

Regenerative Medicine - Internship for 6 months and then pursue Masters degree

0
0
I want to do my career in Regenerative medicine, abroad (primarily US or Germany/ Netherlands)

I am presently pursuing Medical Biotechnology from DY Patil University, Pune in my final year.

I wish to have a better chance of good job overseas and for that, I do wish to do my masters there itself (abroad).

Now my query, as a need of my curriculum, I am supposed to do a 6-month internship during my final semester (i.e from Jan 2019 to June 2019) - I want to use this opportunity of Internship for getting me the best possible career in Regenerative Medicine field.

Hence, want suggestions of all the stalwarts as well as members here, on which place (private lab or university) must I do my Internship - I am also ready to go abroad for this internship, to boost my career - and also wish that this internship should help in landing me into the best possible University for Regenerative medicine.

I hope i am able to pen down my query well.  Your response is highly appreciated.

Many thanks to all of you here well in advance. Smile

Books

0
0
Can anyone send me the soft copy of "Bioinformatics- Methods and Applications: Genomics, Proteomics and Drug Discovery"(4th edition) by S.C. Rastogi, P. Rastogi, N. Mendiratta

Need a job

0
0
Hi Sir/Ma'am,

I am fresher, I have completed my B. Sc +M.Sc in biotechnology in may 2018 only. I am not preparing for CSIR right now. I need a job related to my field only as my core interest is in R&D only. I have good internship records. Please suggest me some jobs suitable to my profile. I am very interested in Forensic DNA Analyst profile
.
With Regards.

Gate biotech preparation

0
0
I want to go for an offline coaching in pune for gate.Are there any please ppl let me know fast ?

3rd World Congress on Advanced Biotechnology,May 22-23,2019|Rome,Italy

0
0
Biotechnology Congress 2019 takes immense pleasure in inviting all the participants around the globe to attend “3rd World congress on Advanced Biotechnology” to be held at Rome, Italy during May 22-23,2019.

Biotechnology Congress is organized by Allied Academies. Allied Academies every year hosts interdisciplinary international conferences worldwide on cutting-edge basic and applied research in life sciences, Pharma,Medicine, Healthcare and Nursing delivered by the best talents in industry and academia. Our conferences are oriented to drive the scientific community at large, facilitating access to the newest technical and scientific achievements and to shape future research directions through the publication of applied and theoretical research findings of the highest quality. Bound together Allied Academies has transformed into a prominent choice for the experts and academicians to display their marvellous duties. The distributer gives pursuers and creators an aggregate stage to confer their work to the overall gathering.

Regenerative Medicine - Internship for 6 months and then pursue Masters degree

0
0
I want to do my career in Regenerative medicine, abroad (primarily US or Germany/ Netherlands)

I am presently pursuing Medical Biotechnology from DY Patil University, Pune in my final year.

I wish to have a better chance of good job overseas and for that, I do wish to do my masters there itself (abroad).

Now my query, as a need of my curriculum, I am supposed to do a 6-month internship during my final semester (i.e from Jan 2019 to June 2019) - I want to use this opportunity of Internship for getting me the best possible career in Regenerative Medicine field.

Hence, want suggestions of all the stalwarts as well as members here, on which place (private lab or university) must I do my Internship - I am also ready to go abroad for this internship, to boost my career - and also wish that this internship should help in landing me into the best possible University for Regenerative medicine.

I hope i am able to pen down my query well.  Your response is highly appreciated.

Many thanks to all of you here well in advance. Smile

LED Waterproof Module

0
0
50W LED Module
Part Number: LT-M270-50W
Power: 50W
LED chip Quantity: 48 pcs
Lumen: 135-145lm/w
Dimension:27cm x 75cm x 55cm
Waterproof: IP66 Rating is suitable to work on outdoor


Parameters of 50W LED Module
LED Chips:SMD3030
Beam angle:Chips(60×60°,90×90°,144×62°),
(132×78°,120°),(90°,90×90°)
Power consumption:30W 40W 50W 60W 70W 75W
Power Cord:0.75mm2 triple shield wire
Multi-voltage:100V-305V/50-60HZ
IP Grade:IP66/IP67
Dimension:27cm x 75cm x 55cm
Net Weight:7.0KG
Rated lifespan:>50000H (5/10 Year Limited)
Light source:30PCS.48pcs optional
Color Temperature:2700K-7000K
Light Distribution:Asymmetric / rectangular
LED Junction Temperature:≤70°C (@ Ta=25°C)
AdvantageOur customers using unique LED Lighting & Intelligent Lighting Controls save as much as 90% on their Running Cost & Carbon Footprint



Advantage of 50 LED Module
1.Patented independent module design, construction installation flexibility;
2.IES files available for all modules
3.Aluminum alloy heat sink with anti-corrosive dull polish treatment,a good professional fin design, thermal performance.
4.Easy to installation and maintenance;
5.Can work with solar system;
6.Luminous efficiency can reach 135lm/w(CRI>70)125lm/w(CRI>80)
7. Flexible :rotatable bracket ,easy installation
8.Beam angles:60×60°,90×90°,144×62°132×78°,120°90°,90×90°  
9.Widely using: led street lights, tunnel lights, gas station light, industrial module high bay lights, etc.

 

Where to use the 50W LED Module
It is used in the street light ,high way led lamp,tunnel lamp ,square lamp,road lamp, city lighting, parking spot lamp, scenery area and so on. It will be the best to replace traditional high pressure street light .It is also the best choice to retrofit the old HPS lamps as replacement .
LED Waterproof Module
website:http://www.plantledgrowlight.com/led-waterproof-module/

China Wheel Protection Fender Trim Mould factory

0
0
Our Factory
OdinMould is specialized in designing and manufacturing plastic injeciton moulds.SMC/BMC compression mould.
Mold products cover daily necessities, household appliances, auto parts, children's products and various types of custom plastic products.
"High efficiency , Optimum cost,Precision,High quality," is our aim towards each project.
Our plastic injection molds comply with high quality standards, detailed mould specifications and special requirements, enabling us to offer our customers a comprehensive solution to their injection molding needs.
We're using the Pro-E, Solidworks, Unigraphics, Cimatro, Catia, mold flow and Auto CAD tools for 3D mold design and 2D part design,the tooling equipments with CNC milling machines, deep hole drilling, CNC lathe machine, 600T pressing machine, EDM, engraving machine etc.
Due to our consistent business philosophy, we can gain an excellent client in international markets. We have done a lot of plastic injection moulds to Canada, USA, Mexico, Czech,Slovenská,Argentina, Costa Rica, Colombia, Venezuela, Ecuador, El Salvador, Guatemala, ,Chile, Brazil, Russia, Ukraine, Australia, , Greece, Saudi Arabia, Turkey, Dubai, etc.
OdinMould always keep in mind: excellent quality, competitive price, perfect service and on time delivery.
For more information about our injection molding or any of our further services, contact us today, we hope!
Our Product
daily necessities, household appliances, auto parts, children's products and various types of custom plastic products.
Product Application
daily necessities, household appliances, auto parts, children's products and various types of custom plastic products.
Production Equipment
CNC milling machines, deep hole drilling, CNC lathe machine, 600T pressing machine, EDM, engraving machine etc.
Production Market
Canada, USA, Mexico, Czech,Slovenská,Argentina, Costa Rica, Colombia, Venezuela, Ecuador, El Salvador, Guatemala, ,Chile, Brazil, Russia, Ukraine, Australia, , Greece, Saudi Arabia, Turkey, Dubai, etc.
Our service


Plastic Mould Project Manage
1.Part feasibility analysis (with customer)
Cost re-evaluation
Lead time pre-check
2.Design Preparation
Get 3D/2D drawing & customer Tool Standard (refer to picture Customer Tool Standard Example), Specification (refer to Specifications example)
Design meeting (project manager, R&D, toolmaker, processing engineer)
Mold flow (if necessary) ( Mold flow video, Mold flow analysis in PDF.
Layout Solution
3.Tool Design
Tool design start and self-check according to GA checklist
Design review meeting (3D tool design review, manufacturing workmanship review)
Tool design to customer for approval
Tool design adjust according to customer comments
Repeat this until customer final approval
4. Schedule
Send final detailed daily schedule to customer.
Procedure Control
Weekly report to customer by photos, E-mails, Skype meetings
Project manager daily follow up according to schedule
5.Preparation for Trial
Project manager gets information for samples quantity, color, raw material ready f for processing engineer.
6.After T1
ISIR (Initial Sample Inspection Report) for 5 samples per cavity
Samples to customer
PFU (Problem Follow Up) which contents photos of detailed problems and suggested solutions
Pre-delivery tool inspection according to check list
7.Modification & Correction
Dimension correction upon ISIR and customer’s feedback upon samples
Evaluate with customer for modifications and supply new trial time
Repeat until customer final approval on samples
8.Tool Inspection
Final self tool inspection
Some customers come over for tool inspection
Capability study by running small batch production
9.Shipping
Arrange either door to door or door to port service for tool deliveryShipping | Odin Mould Ltd.| China Injection Mold Manufacturer
Send delivery information (ETD, ETA, Vessel name etc) to customer
Check with customers for their trials in house about the tool performance in 10days upon tool arriving.
Final conclusion meeting for summary.
10.Customer service
1Installation of moulds and guidance service:
1)After the arrival of moulds , if need our help solve with the technical issues, we will send engginer but the round-trip air tickets and accommodation will be on customers expense. Along With the engineer’s salary will be included. (Average Engineer’s salary :USD$120/Day/engineer)
3) Engineers will stay in buyers’ country for the agreed date , guide the workers to use The mould and other necessary technical as free of charge.
2 Quality Warranty and other after service
1) Each moulds Gurantee period is 12 months starting from the date of moulds accept in the Buyer’s factory During the guaranty period:
•If any mould is in any small problem because of the different machine injection, the Seller will provide the repairing method.
•If any spare parts broken, the seller should remake new and good quality ones and send to the Buyer,
•If the moulds happen the big problem, The moulds cannot repaired, the Buyer cannot solve the problems,eg, mouldcrack, product can’t moulding… any big problem(except the human issues) Seller and Buyer's negotiate to slove the problem, the buyer can send it back to the factory for repairing.China Wheel Protection Fender Trim Mould factory
website:http://www.plasticomould.com/

Customized Hard Acrylic Plastic Boxes

0
0
PacZone Limited is an experienced manufacturer specializing in injection plastic Packaging as plastic watch box, watches stand, Candy box, Plastic Chocolate & Gift Box. and Display design and production for customers. Factory established in 1997 year, With advanced equipment and excellent management team, our goods are in outstanding quality to meet international standard. From concept and design, mould building, testing and quality control, packaging to shipment, we are your “One-Stop Solution”. We produce top-quality packaging items, in an efficient, low-stress, cost-effective manner.


PacZone Limited Factory area PacZone Limited Workshop
 
PacZone Limited Office
 
Injection Workshop
 
 
PacZone Essembly workshop
 
 
PacZone Products
   
       
   Customized Hard Acrylic Plastic Boxes
website:http://www.plasticpackingbox.com/
website2:http://www.plasticgiftbox.net/

Double Sided Plastic Pallets price

0
0
Pure HDPE Plastic Pallet


The superiority of the pure HDPE plastic pallet:
The process of making plastic pallets includes blow molding and injection molding, each of which has its own unique advantages and disadvantages. However, in most of the application scenarios, blowing plastic pallets are more durable and reliable.


Product advantage description of the pure HDPE plastic pallet:
1. Unique manufacturing process
The  plastic pallet has a unique manufacturing process, and it is a double - sided thermoforming tray. As a result, theseplastic hollow pallet are widely used in industrial fields, especially in very cold environments.


2. High load capacity
This is another basic feature of the blow molding process. These plastic pallets are designed for carrying large quantities of goods. The static load may vary between 4 and 6 tonnes, with a dynamic load range from 2 to 3 tonnes. Of course, the capacity of these loads depends on the ability to control the thickness of the blow molding plastic pallet during the manufacturing process.


3、Strong impact resistance
When loading and unloading the goods, the impact will lead to the wear of the pallet, especially in the low temperature environment, the damage will be greater. However, the pure HDPE plastic pallet is still able to maintain its structural integrity and high strength because of its special technology. The impact strength of the blow molding pallet is almost two times that of the injection pallet.


4.Longer service life
Since it is made of high quality HDPE materials, the service life of these pure HDPE plastic pallets is more than 5 years longer than that of ordinary pallets. Of course, the actual situation depends on your industry.


On the use of blow molding tray forklift some safety operation specification:
1.Drivers who have been trained and held driving licenses can drive. Driving a forklift on a highway requires at least a B driver's license. To operate a forklift in a workspace, a driver's license must be issued by the employer in writing. Drivers do not drive after the effect of drugs and alcohol, which is the basic safety rule. In addition, the license of no supplier or manufacturer shall not be modified without authorization.  
2.Check the control and alarm devices before driving. If they are found to be damaged or defective, they should be operated after repair.  
3.When handling, it should not exceed the specified value. The fork must be inserted into the bottom of the cargo. The length of the blow tray at least 2/3 is not allowed to run with a single fork.  
4.The center of gravity that is placed on the tray of blow molding cannot be too high and must be stacked orderly in order to prevent collapse.  
5.When driving on ramp, we should drive carefully. When driving on a ramp greater than 1/10, the uphill should go forward. The downhill should be back up. Avoid steering on the up or down slope. When the forklift is running, do not load and unload.


Omni-directional display of pure HDPE plastic pallet:Double Sided Plastic Pallets price
website:http://www.plasticpalletblowing.com/plastic-pallet/double-sided-plastic-pallets/

D4 Spring type Centering sensor

0
0
PLUS AUTO Tooling solution is one of the most professional EDM clamping systems’ manufacturer under US Maxxtooling group investment and management since 2012. We develop and produce world-class quality repeatable clamping system which can be use on various machines in molding industry, especially in CNC automatic machining and EDM automatic machining.


With hundreds of worldwide customer supporting, PLUS AUTO solution has been well known and chosen to be their clamping solution partner under 20 countries+. Our purpose is to bring more world-wide mold producer enjoy the benefit of quality automatic production with more reasonable and affordable.D4 Spring type Centering sensor
website:http://www.plusautosolution.com/
website2:http://www.plusautotooling.com/

Hot Perforation Pof Shrink Film manufacturers

0
0
Our History
Shandong fully packing materials co.,ltd is a professional manufacturer in producing environment friendly POF shrink film in China.

Our Factory
We have 10  automatic POF 5-layer co-extruded shrink film production lines. Each month our capacity is nearly 2000tons



Our Product
Our main products are
1.POF standard heat shrink film
2.POF hot perforation film,
3.printing pof shrink film
4. PE shrink film
5. stretch film.



4.Product Application
POF SHRINK FILM IS WIDELY USED IN MANY FIELDS:
FOOD PACKING

BOOKS PACKING

GATHERING PACKING
STANTIONERY PACKING
HOUSEHOLD GOODS PACKING

Our Certificate
We have26 patents.Certified by QS,SGS,FDA,REACH and ISO9001 management system,the trademark has been registered in many countries. Our POF shrink film is BRC certified and it can contact food directly.


Production Equipment
We have pof blowing machines, and cutting machines,and bag making machines and printing machinesHot Perforation Pof Shrink Film manufacturers
website:http://www.pofpacking.com/
website2:http://www.pofpackingsd.com/
Viewing all 2695 articles
Browse latest View live




Latest Images